Driver install on USB device failed due to disconnect, windows won't recognized device once plugged back in. How do I get this device recognized?
I'm trying to get Windows 7 Home Premium 64bit to recognize my M-Audio Axiom 49 keyboard/midi controller, which works fine on my other Windows 7 machine.
The keyboard's USB port was loose, so when I first plugged it in windows tried and failed to install the drivers from the device multiple times as the device constantly connected and disconnected (due to the loose port).
That two-tone 'you just plugged in/disconnected
a device' noise was going off every two seconds.
I unplug the device, fix the loose port, and plug it back in.
The keyboard lights up, so its drawing power, but no 'you just connected noise,' no attempt to install drivers, no recognition of the device whatsoever.
Is there a way for me to force Windows to recognize this device? I tried installing drivers downloaded from M-Audio's website to no avail.
I also tried using different USB ports on my computer, which failed.
Any help is appreciated!
Thanks,
Tuck
Anwsers to the Problem Driver install on USB device failed due to disconnect, windows won't recognized device once plugged back in. How do I get this device recognized?
Download SmartPCFixer for Free Now
Hi Tuck,
· Have you made any changes on the computer prior to this issue?
· Do you get any error message or an error code?
Follow these methods.
Method 1: Run the hardware and device troubleshooter.
http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter
Method 2: Uninstall and reinstall all USB controllers.
Follow the steps:
a) Click Start, type device manager on the search box and press enter.
b) Device manager window will open, expand Universal Serial Bus controllers.
c) Right-click every device under the Universal Serial Bus controllers node, and then click Uninstall to remove them one at a time.
d) Restart the computer, windows will reinstall the USB controllers.
e) Plug in the removable USB storage device, and then test to make sure that the issue is resolved.
Method 3: Put the computer in clean boot state to see if there is any software conflict as clean boot
helps to eliminate software conflicts.
Note: After clean boot troubleshooting steps, follow
Step 7 in the link to return the computer to Normal startup mode.
Make sure you have the latest windows update installed on the computer.
Install Windows updates in Windows 7
Also install the latest chipset drivers from the manufacturer’s website.
http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly
Windows Restore
- Click on the Start button on the Taskbar.
- Type "System Restore" (without quotes) in the Search box and hit Enter or,
- Click on System Restore (when you see System Restore pop up in the list of search results).
- Make sure the "Recommended restore" radio button is checked on the restore utility window.
- Click on Next and follow the instructions given.
Note: There is the option on the restore utility to select "Choose a different restore point". Unless you have a specific reason to select a different date and time than what Windows recommends, just select the recommended option stated in the steps above. If you choose to select another one, follow these steps:
Click on that desired date and time, and Windows 7 will perform a scan for any affected programs in that restore point.Once completed, click Next and follow the instructions given.
Once you have selected the restore point, your system will start the restoring process, after which you will have to restart the system.
Another Safe way to Fix the Problem: Driver install on USB device failed due to disconnect, windows won't recognized device once plugged back in. How do I get this device recognized?:
How to Fix Driver install on USB device failed due to disconnect, windows won't recognized device once plugged back in. How do I get this device recognized? with SmartPCFixer?
1. Click the button to download SmartPCFixer . Install it on your computer. Open it, and it will perform a scan for your computer. The errors will be shown in the list.
2. After the scan is finished, you can see the errors and problems which need to be repaired.
3. The Repair part is done, the speed of your computer will be much higher than before and the errors have been fixed. You can also use other functions in SmartPCFixer. Like dll downloading, windows updating and print spooler error repair.
Related: Way to Update & Download SONY SVE14A2X1EH Wireless State Device driver,How to Update & Download SONY SVS1511X9RB Graphics Driver for D2 (Intel) v.9.17 - 9.17.10.2828,Method to Download SONY VGN-CR290N Realtek High Definition Audio Driver v.5.10.0.5433,Download SONY VGN-FS710/W Utilities DLL Update v.6.4.0.06290 driver,Method to Update & Download SONY VGN-NR460E/P Intel Graphics Media Accelerator Driver v.6.14.10.4847,How to Fix Error 0x0000c1f5 Solución?,Error 0x80071a91 Win7 Fix Patch,Error 0x800ccc60 Windows Live Mail [Solved],Error Message 0x800ccc79 Outlook 2000 Fix,What is Error 0xc1ab0001?,[Answered] x64 saplugin dll,How to Fix Problem - Kb943729 Download?,Troubleshooting: Bccode D1 Error,Java Runtime Tech Support,Troubleshooting: ERROR NO SUCH GROUP Error,Solution to ashoutxt.dll Missing Error,Solution to cxcore096.dll Missing Error,Where can I Find dsauth.dll File,How to Fix msde.dll Not Found Error,Best Method to Fix psizewizres.dll Error
Read More: How to Fix - Does anyone have any images from the website http://privatedancer.org??,Troubleshoot:double click action,Fast Solution to Problem: Disk Management freezes in Windows 7,How to Fix Problem - Documents won't print--HP Deskjet D4160?,How to Fix - Display language... How to change??,Data validation question. Maintaining and updating named ranges.,Desktop Gadget Gallery on Windows 7,delete empty rows,Deleting a page and also how can I copy an exact page lay out on a new page,Date Formula for 1st Sunday of each Month (3rd to 9th)
No comments:
Post a Comment